Precautions for installation of aluminum veneer

Speaking of aluminum veneer, I believe you are no strangers! Aluminum veneer is a common building material, and its application range is very wide. If friends who have a certain understanding of construction must be able to see it often, then for the installation process of aluminum veneer, friends understood? Do you want to know? Next, Shandong aluminum veneer manufacturers will give a brief introduction to the relevant knowledge of aluminum veneer installation precautions:

　　 1. The aluminum veneer should be handled with care during transportation. After a strong impact, the corners of the aluminum plate and its layout will be damaged, which will affect the construction and waste money.

　　 2. During the installation of aluminum veneer, pay attention to the protection of the layout, do not touch the ground with the layout, so as not to scratch the decorative surface.

　　 3. The variety, color, quality, pattern and line of the aluminum plate should conform to its design requirements and should have a product certificate.

　　 4. If the steel wall keel of the curtain wall is used, its specifications and shape should meet its design requirements, and rust removal and anti-rust treatment should be carried out.

　　 5. When installing aluminum veneer, when the design does not require, use core-pulling aluminum rivets, rubber rings must be placed in the middle, and the distance between core-pulling rivets should be controlled within 100-150mm.

　　 6. After the installation is completed, be sure to tear off the protective film after three days. It will be difficult to tear off after a long time, and it will affect the appearance after tearing off.

Aluminum veneers can be applied in many places such as stations, balconies, conference rooms, etc., so the installation of aluminum veneers is a knowledge that can be used from time to time, so it is recommended that all of you can understand today’s simple understanding for future use. .