What is the reason for the color difference of punching aluminum veneer

After the punched aluminum veneer is produced, we sometimes find that there is a large color difference. So, what are the reasons for the color difference of punched aluminum veneer? This is a question we are going to introduce to you today. Let’s take a look at it.

　　Punched aluminum veneer is made of wood grain transfer paper and baked at high temperature. The color difference is mainly caused by baking. Because the temperature control level is not enough, it will cause the surface transfer paper to be different in depth, and then make the color of different batches of punched aluminum veneer different.

　　 Therefore, to avoid this chromatic aberration problem, it is necessary to start from two aspects of technology and equipment. This requires the selection of large professional punching aluminum veneer manufacturers, because the equipment of these manufacturers is updated faster and the technical level is relatively high, which can avoid the problem of color difference.

　　 Generally speaking, the color difference of the punched aluminum veneer is caused by the above reasons. When processing, we need to pay attention to these problems and avoid causing color difference. I hope that the above introduction can bring you some tips and help.